IS Families/IS91-ISCR families

From TnPedia
Jump to navigation Jump to search


IS91 was identified in the early 1980s in a number of hemolytic plasmids of different incompatibility groups [1] and characterized in the alpha haemolytic Escherichia coli plasmid, pSU233, as a 1.85 kb Insertion Sequence which could transpose sequentially to a variety of other plasmids including pACYC184, R388, and pBR322. These original studies identified a majority of simple insertions but also a few percents of apparent cointegrates [2]. A number of related IS have been identified and two, IS801 from a multi-antibiotic resistance Escherichia coli plasmid pUB2380 [3] and IS1294 from a Pseudomonas syringae plasmid [4], like IS91, have also been shown to be active in transposition. More recently, it has been suggested that another group of related sequences, the ISCR (for IS with Common Regions), are instrumental in transmitting antibiotic resistance genes [5][6]. IS91 family members have related TEs in eukaryotes, the helitrons [7][8][9].


IS91 itself (Fig.IS91.1) includes two imperfect terminals 8 base pair inverted repeats (5'-TCGAGTAGG….CCTATCGA-3'). The ends also include a variety of sequences with dyad symmetry which might form secondary structures or simply are the recognition signals for transposase binding. The left end, terIS (see Mechanism below) carries short hexanucleotide inverted repeats also observed in both IS801 and IS1294 while neither element exhibits imperfect terminal IR [4][10](Fig.IS91.2) . The right end of IS91 and of IS801, oriIS, shows a more complex pattern of dyad symmetry (Fig.IS91.3) , although IS1294 only possesses a single short sequence with dyad symmetry at this end.

Fig. IS91.1. Organization of IS91. This figure shows the IS91 HUH (Y2) transposase In violet, together with its zinc-binding domain and catalytic domains in gray beneath. ORF121 of unknown function is shown as a purple box. The arrow heads indicate the direction of transcription/translation. The terIS and oriIS segments are also shown as grey boxes, arbitrarily drawn as 100bp. The short terminal inverted repeats are shown as grey arrows below. Sequences that show diad symmetry and may be able to form secondary structures are indicated as head-to-head arrows: yellow at the left for terIS and green and blue at the right for oriIS. The DNA sequences are shown at the bottom of the figure. Details from [10].
Fig. IS91.2. Short Dyad Symmetry at terIS. The 6bp imperfect inverted repeat sequence is shown as yellow arrows. The 5’ ends of the ISs are shown on the left. Data is from Tavakoli et al. 2000
Fig. IS91.3. Sequences at oriIS. The figure compares the potential secondary structures at oriIS of both IS91 and IS801. Note that this is the complementary strand compared to that shown in [10]. This is so that the sequence is compatible with the polarity shown in Fig.IS91.1. The target sequence is shown in red, together with the position of the nick introduced (on the bottom strand) by the Y2 HUH transposase.

Unlike the majority of insertion sequences and transpososns, IS91 family members do not generate direct target repeats (Target Site Duplications) on insertion [11]. IS91, IS801 and IS1294 appear to insert specifically 5' to 5'-GAAC or 5'-CAAG tetranucleotide with the same relative orientation to the target sequence [4][12][13] (Fig.IS91.1 and Fig.IS91.3). The DNA sequence of IS91 showed a long orf, the transposase with a cysteine-rich N-terminal region probably forming a zinc finger (Fig.IS91.4a) and a C-terminal catalytic domain comprising a HUH triad together with two tyrosine residues (Y2) (Fig.IS91.4b).

Other members of the family also exhibit these characteristic motifs (Fig.IS91.4c). The second orf of unknown function is located upstream and its termination codon overlaps the initiation codon of the transposase indicating that expression of the two proteins may be translationally coupled. Insertional mutagenesis of the longer orf using Tn1732 demonstrated that it was essential for transposition [14] whereas insertion into the upstream orf had no effect on transposition frequency but appears to impact the choice of the target [15]. This orf is absent from both IS801 and IS1294 as well as in all other IS91 family members in ISfinder.

Fig. IS91.4a. Alignment of IS91 family transposases. The data are from ISfinder and were analyzed using Clustal omega (Madeira et al., The EMBL-EBI search and sequence analysis tools APIs in 2019) with default settings. The figure shows the five domain structure as described by Garcillán-Barcia et al., 2002). Accession numbers can be found in the appropriate file in ISfinder. a: motifs I, a potential zinc-binding cysteine-rich region probably involved in DNA binding, and II.

Fig. IS91.4b. Alignment of IS91 family transposases. The data are from ISfinder and were analyzed using Clustal omega (Madeira et al., The EMBL-EBI search and sequence analysis tools APIs in 2019) with default settings. The figure shows the five domain structure as described by Garcillán-Barcia et al., 2002). Accession numbers can be found in the appropriate file in ISfinder. b: motifs III, containing the HUH residues, and IV carrying the catalytic tyrosine(s)n Y.

Fig. IS91.4c. Alignment of IS91 family transposases. The data Are from ISfinder and were analyzed using Clustal omega (Madeira et al., The EMBL-EBI search and sequence analysis tools APIs in 2019) with default settings. The figure shows the five domain structure as described by Garcillán-Barcia et al., 2002). Accession numbers can be found in the appropriate file in ISfinder. c: highly conserved C-terminal domain V.

However, in the limited number of IS91 family members catalogued in ISfinder, several appear to include an additional orf, unrelated to that in IS91, either upstream (ISAzo26, ISCARN110, ISMno23, ISSde12, ISShvi3, ISSod25 and ISWz1) or down-stream (ISMno24 and ISTha3) of the transposase gene. BLAST analysis shows the product of this orf to be related to tyrosine recombinases (Fig.IS91.6). Alignments of the associated transposases (Fig.IS91.4a, b and c, and Fig.IS91.5) fall into three groups: related IS91 family members (including IS91, IS801 and IS1294), those which have been classified as ISCR (see below) and those that also carry the putative tyrosine recombinase. Those IS which carry the second integrase orf and the ISCR transposases carry only a single catalytic Y residue in the HUH transposase (Fig.IS91.4b).

The transposases encoded by these IS are related to those of eukaryotic helitrons [16] and to the rep proteins which initiate rolling circle replication in some plasmids and ssDNA viruses such as that of AAV (Fig.IS91.7). They are also related to, yet topologically distinct from, relaxases of conjugal plasmids due a circular permutation of their domains. A comparison of various members of the HUH family of endonucleases is shown in Fig.7.5 (see [17]). Several include 5' to 3' helicase domains which might facilitate DNA unwinding during the replication/transfer process. The IS91 and ISCR transposases do not, suggesting that they might rely on host enzymes for this function.

Mutagenesis of the IS91 transposase demonstrated that both Y residues (Y249 and Y253) are essential for transposition in vivo [18].

Fig. IS91.5. Alignment of IS91 family transposases. The sequences were taken from those in ISfinder. Note that, in addition to the transposases defined in ISfinder, when examined in their sequence environment, all copies of ISVsa3 and ISCR2 carry N-terminal extensions which systematically extend outside the defined IS. The extensions appear to include the cysteine-rich zinc-binding domain, which suggests that both IS are in fact significantly longer than those cataloged in IS finder. They were analyzed using Clustal Omega.
Fig. IS91.6. Alignment of IS91 family recombinase-like orfs. The data are from ISfinder and were analyzed using Clustal omega (Madeira et al., The EMBL-EBI search and sequence analysis tools APIs in 2019) with default settings.
Fig. IS91.7. Alignment of IS91 family transposases showing relationshipwith other HUH enzymes. Conserved residues are boxed in blue From top to bottom: phage ΦX174 grp protein (P03631), the transposases of IS91 (CAA34970) and IS801 (CAA40540), rep proteins from rolling circle replication plasmids pUB110, pLAB1000, pLP1, pFTB14, and pC194 as well as Heltiron 1 copies from O. sativa (BAA99532), A. thaliana (AAD15468) and C. elegans (AAF60434). Taken from Mendiola and de la Cruz 1992 and Garcillan-Barcia and de la Cruz 2002.


A survey of the sequence databases using IS91 transposase as a the query revealed very similar transposases present in a range of bacterial genera including Bergeyella, Fusobacterium, Rhizobium, Shewanella, Pseudomonas, Klebsiella, Shigella and Escherichia [10] and a number of related orfs in Mesorhizobium, Pseudomonas, Vibrio and Salmonella [19]. These include both chromosomal and plasmid-carried copies. BLAST analysis of the present public protein sequence databases (June 2020) showed the transposases of the family to be very widely spread. While the identification of the transposase is straightforward, the definition of the entire IS at the DNA level is more problematic due to the general absence of terminal inverted repeats and of target site duplications therefore only afew full length IS have been identified.


The similarity to rolling circle replication proteins both plasmid and viral suggested that IS91 and other family members transpose using a novel rolling circle transposition mechanism [4][16]. This idea was reinforced by in vivo studies on its transposition behavior. In addition to its specific insertion at 5'-GAAC (GTTC) or 5'-CAAG (CTTG) target sequences, IS91 insertion was found to be orientation-specific: the right end is inserted adjacent 5' to the target sequences as shown in Fig.IS91.1 (note the DNA strand polarity in this figure is such that cleavage would occur on the bottom strand). It was also shown that the flanking tetranucleotide target was necessary for further transposition along with an 81 base pair sequence within the right end, oriIS, while the left end was dispensable.

Mutants in which terIS had been deleted were found to retain transposition activity and generated insertions of tandem multimers of the donor plasmid (Fig.IS91.8 and Fig.IS91.9) with one transposon/target junction precisely at the oriIS end and the other variable carrying a different length of plasmid sequence but flanked by a tetranucleotide target sequence [20]. Analysis of transposition products using a plasmid transposon donor carrying an IS91 copy with a deleted left end (terIS) in mating out assay identified fusions of the donor and target plasmids which occurred at roughly the same frequency as cointegrates with a wild-type IS. Examples of two, three and 4 tandem copies of the inserted donor plasmid were observed (Fig.IS91.8). Since each of the variable ends of the insert (left in Fig.IS91.8) terminated with a characteristic GTTC or CTTG tetranucleotide resident in the donor plasmid, this is consistent with a rolling circle type transposition mechanism where the process initiates by nicking of the the oriIS tetranucleotide copy and, in the absence of the terIS sequence, terminates inefficiently by recognition of the secondary target tetranucleotide within the donor plasmid DNA.

Fig. IS91.8. Tandem Insertions resulting from one ended transposition. The top cartoon shows the donor plasmid linearized for convenience. The IS91 derivative with a disabled terIS end IS91DterIS) is shown as a yellow box with the transposase together with its direction of expression shown as a purple arrow. OriIS is indicated by a grey box and a vertical blue arrow. The alternative conserved target sequences located at oriIS are shown in their double-stranded form in red within a black box. Plasmid sequences are indicated in blue, with the plasmid origin of replication as a green oval and a selectable chloramphenicol resistance gene in red. Potential hypothetical target sequences within the plasmid are shown in their double-strand form in red within a black box, and their hypothetical positions are indicated by black vertical arrows. The bottom three sections show integration of one, two, and three plasmid copies together with an addition's plasmid fragment delimited by one of the three hypothetical conserved target sequences. This figure is based on data from Mendiola et al.,1994

Normal transposition results in the insertion of the IS so that oriIS abuts the conserved target tetranucleotide with terIS defining the other boundary. The low level (2%) of cointegrates observed in early studies [2][11] suggests that they are generated by the type of one ended transposition observed in the terIS deleted IS mutants (Fig.IS91.9). The relationship between these two types of event at the molecular level is unclear at the moment. Clearly the signal, terIS, recognized in normal transposition is different from that recognized in cointegrate formation or “one-ended” transposition (the tetranucleotide sequence). Studies using an artificial IS91 derivative in which oriIS and terIS flank a selectable kanamycin resistance gene carried by a plasmid with an independently inducible IS91 transposase gene revealed that induction of transposase expression resulted in the production of two novel DNA species. One was sensitive to single-strand nuclease S1 and which showed complementarity to an oligonucleotide expected to hybridize with oriIS on the strand thought to be displaced and transferred but not to a terIS-specific oligonucleotide with complementarity to the opposite strand (Fig.IS91.10) [18]. The other hybridized to both oriIS and terIS oligonucleotides. PCR amplification using appropriate oligonucleotides and each of the new DNA species and DNA sequencing showed that both carried a junction in which oriIS and terIS were abutted. Circle formation depends on an intact transposase Y2 motif. This suggested a circle formation mechanism which was dependent on an presence of both active site tyrosines of the transposase. However, it is not yet clear whether circles either in the ssDNA or dsDNA forms are intermediates in the IS91 transposition pathway [18].

Fig. IS91.9. IS91 transposition and cointegrate formation. The figure illustrates the difference between true transposition (right side), in which the IS insertion terminates with the exact terIS sequence, and events originally scored as 2% cointegrate formation. Cointegrate formation is probably an example of one-ended transposition in which termination occurs at one of the conserved tetranucletide sequences in the donor plasmid. The features are the same as those described in Fig.IS91.8. In addition, terIS is indicated by a gray box and a vertical blue arrow.
Fig. IS91.10. Single and double-strand circles. The features are the same as those described in Fig.IS91.8 and Fig.IS91.9. The donor transposon is composed of oriIS and terIS sequences bordering a kanamycin resistance gene(red arrow). Oligonucleotides used in hybridization are shown as horizontal blue half arrows. Note that transposase is provided in trans from a neighboring cloned gene. From top to bottom: IS donor; transposase catalyzed nick at oriIS (vertical black arrow); Peel-off of the displaced strand and replication primed from a 3’OH introduced by transposase cleavage (transposase remains attached to the 5’ end via a phosphotyrosine covalent bond); “termination” of transposition by cleavage at tetIS and covalent joining of both ends to generate a single stand circle, regeneration of the original double-strand donor molecule and production of a double-strand circle by replication. Note that the mechanism for this is at present unclear.

Transposition models

The present model(s) for rolling circle transposition is shown in Fig.12.2 and Fig.12.3. The first involves an initiation event at one IS end, polarized transfer of the IS strand into a target molecule, and termination at the second end Fig.12.2 [10][19]. An alternative model involving transposon circle formation is shown in Fig.12.3. This model is attractive since it would liberate the transposon circle intermediate to locating a target site following circle formation rather than requiring target engagement during the replicative transposition process as does the first model (Fig.12.2).

Transposition is postulated to initiate at IRR as a result of transposase-mediated cleavage (one of the active site tyrosines generates a 5’-phosphotyrosine born with the transposase), and the 3′-OH generated in the donor molecule would act as a primer for DNA replication while one transposon DNA strand is peeled off. Transfer of the donor sequence to a target is driven by replication in the donor, during which displacement of the active transposon strand would be driven by leading-strand replication (in the absence of a transposase associated helicase domain). Transfer of an ssDNA IS91 copy into the target DNA is accomplished when ter‑IS is reached and cleaved. This occurs after the replication of the entire transposon. A second transposase-catalyzed event is thought to result in strand-transfer by nicking the 3’-end of the transposon and joining it to the 5’-end of a target site.

Termination fails at a high frequency (1-2% of all insertions), resulting in so-called one-ended transposition, as it results in the insertion of additional flanking donor-plasmid genes 3′ to the IRL sequence. The dsDNA circles could result from replication restart or from the extension of a trapped Okazaki fragment on the excised ssDNA circle. The relationship between transposition of IS91 and replication of the donor and target replicons is not known. It is also not clear what role, if any, the circular transposition intermediates play.

Note that IS91 insertion is reminiscent of that of members of the IS200/IS605 family[21] which have been shown to transpose using a single stranded circular intermediate by a mechanism called “peel and paste”. These also insert with one end next to a specific tetranucleotide and this, like that of IS91, the target is also required for further transposition.

Flanking gene acquisition is thought to occur when the termination mechanism fails and rolling circle transposition extends into neighboring DNA where it may encounter a second surrogate end [10]. These types of mobile element may prove to play an important role in the assembly and transmission of multiple antibiotic resistance [5][22].


More recently, a group of related elements, ISCR (IS with a "Common Region") was described (reviewed in [5][23][24]). The CR is an orf which resembles the IS91 family transposases [17] previously called orf513 [25]. A major feature of ISCR elements is that they are associated with a variety of antibiotic resistance genes. It is possible that ISCRs can facilitate the movement of neighboring resistance genes by a mechanism similar to one-ended transposition exhibited by IS91 (Fig.IS91.9). An alternative view may be that the major impact of ISCR elements is via homologous recombination exchange rather than transposition per se [5][26]. The fact that ISCR elements ISCR3, ISCR4, ISCR14, and ISCR16, which show between 75% and 97% identity in their transposase orf, and are located downstream from a groE-like orf has led to the suggestion that they may all be descended from a common ancestor [27]. Since their sequence environment is identical, this further suggests that they are relatively inactive in transposition. There is as yet no formal demonstration that these transpose.


ISCR1 is almost exclusively associated with integrons and the end which, according to the IS91/IS801/IS1294 model should carry terIS, and is always located downstream from a qacH-sul1 gene pair (specifying fluoroquinolone and sulfonamide resistance respectively) with an upstream integron recombination site (Fig.IS91.11). As shown by Toleman et al. [5][24] all members they identified from GenBank using the ISCR1 DNA sequence as a query exhibited this feature although there was variation further upstream due to loss and capture of integron cassettes. This upstream sequence identity makes it problematic to define the terIS sequence. However, if ISCR1 was responsible for ABR gene movement using the “one-ended” transposition mechanism of IS91 family elements, it is the sequences flanking the terIS end that should show diversity. Toleman et al.[24] suggested that one-ended transposition indeed occurs but that the secondary signal which provokes termination of transposition occurs upstream of the intI gene (Fig.IS91.11). Variation in the flanking DNA sequence does occur but this is flanking the oriIS end. Conservation of the ISCR1 sequence ends with GTGGTTTATACTTCCTATACCC in all examples [24] (Fig.IS91.11). It is not clear from these data whether there is a tetranucleotide target sequence because this would require the DNA sequence of an empty site that is not available. Given that, for IS91, this tetranucleotide is important for transposition, that data may actually indicate that the copies of ISCR1 identified are inactive.

Fig. IS91.11. ISCR1 sequence environment. A) part of integron In36 carrying a copy of ISCR1 (yellow box). The features are shown are as follows from left to right: type I integron integrase (blue); integron attachment site (recombination site), attI (green); integron recombination site for the dfr cassette (geen separated by a dotted line); a dehydrofolate reductase gene, dfr (red); integron recombination site for the aad3 resistance gene cassette (geen separated by a dotted line); aad3 resistance gene (red); qacH and Sul1 resistance genes (red); ISCR1 transposase gene (purple); qnr and bla resistance genes (red). The arrow heads indicate the direction of transcription/translation. B) Alignment of the right ends of different ISCR1 copies (Clustal omega in the SnapGene package). The consensus sequence is shown above, and the copies used in this analysis are shown with their accession number at the left.

ISCR2 is cataloged in ISfinder as ISVsa3. However, further analysis indicated that all copies included a transposase with an N-terminal extension located outside and upstream of the IS DNA sequence. This carries the important Cysteine-rich zinc-binding domain and the HUH motifs of the canonical IS91 family transposases. ISCR2 has proven easier to define because of sequence diversification upstream (flanking terIS) and downstream (flanking oriIS) (Fig.IS91.12) and now encompasses the full-length transposase orf. ISCR2 exhibits a reasonably robust tetranucleotide at its oriIS end of GTTG (17/28) and there is an A/T-rich region located slightly downstream. ISCR2 there possesses all the characteristics of a complete IS91 family insertion sequence.

Little is known concerning the other ISCR (3 to 12) [5][24]. ISCR8 has also been cataloged in ISfinder as ISPsp1 and ISCR21, like ISVsa3 (ISCR2), include a transposase with an N-terminal extension located outside and upstream of the IS DNA sequence which carries the Cysteine-rich domain.

Fig. IS91.12. ISCR2 terIS and oriIS. The alignment of the left and right ends of different ISCR2 copies was performed with Clustal omega in the SnapGene package. The consensus sequence is shown above and delineated by a blue bracket. Both ends can be defined since there is sufficient sequence diversity between the different examples. The position of a probable tetranucleotide target sequence is shown in black and is a relatively well-conserved A/T rich sequence downstream. The copies used in this analysis are shown with their accession number at the left.


Interestingly related transposase proteins were also observed in a variety of eukaryotic organisms including plants and in the worm Caenorhabditis elegans [7] and some mammals such as bats. They can be identified, many as extinct fragments in the genomes of members of all eukaryotic kingdom [8][9][28][29][30]. Like IS91 family members, Helitron transposition is often associated with the capture and mobilization of host genomic fragments, resulting in the dissemination of genomic regulatory elements [28][31]. Unlike those of IS91 family members, their transposases possess a 5' to 3' helicase domain. downstream of the HUH endonuclease domain.

Progress had been made in understanding the mechanism of helitron movement using reconstituted transposon from the little brown bat, M. lucifugus, throwing light on how IS91 family members might transpose. Since there were no known active helitron copies, a functional copy, called Helraiser was reconstructed based on consensus sequences [32]. Its transposase (1,496 amino acids) exhibits large and unique N-terminal domain and a catalytic core with an HUH motif with two active site Tyr residues as do IS91 family transposases. This is preceded by an N-terminal eukaryote-specific nuclear localization-like signal and followed by a long (600-aa) helicase domain characteristic of the SF1b superfamily of DNA helicases, and carrying sequence motifs of the eukaryotic Pif1 helicases [32]. The transposase orf is bounded by left and right terminal sequences (LTS and RTS) terminating in conserved 5’-TC/CTAG-3’ which are characteristic of the Helibat1 helitron family [28]. Like IS91, RTS exhibits a 19bp palindrome just upstream.

Helraiser was able to form covalently closed transposon circles, just as does IS91 [18]. The sequence of the Helraiser circle junction revealed that the left end (LTS) 5′-TC dinucleotide was covalently joined to the CTAG-3′ tetranucleotide of the right end (RTS). In addition, plasmid molecules containing the cloned junction obtained by propagation in E.coli, underwent transposase-dependent integration when co-transfected into HeLa cells. The DNA sequence of 10 independent insertion junctions indicated that all had inserted into an AT dinucleotide, a general characteristic of Helitrons. Moreover, not only could the Helraiser transposase mobilize structures with its own ends, but it was also capable of mobilizing the cloned ends of two of three naturally occurring defective Helibat family members.

Mutation of the HUH motif or either of the two tyrosine residues (Y727 and Y731) in the catalytic domain or a Walker A box or arginine finger in the helicase domain reduced transposition to undetectable levels. It was also shown that the HUH motif and Y731 were required in vitro for cleavage of single-strand oligonucleotides representing the Helraiser ends. This study also investigated the sequences at each transposon end required for transposition in a similar way to the approach used for IS91 [20]. Deletion analysis showed than an intact LTS was required suggesting that it might be equivalent to oriIS of IS91 family members, while RTS was not strictly required although removal of the sequence with dyad symmetry or the entire RTS reduced activity. This, again, is similar to IS91 and would facilitate the transduction of neighboring genes.

Further studies addressing the nature of donor, target, and transposon intermediates [33] in human cells showed a requirement for double-stranded transposon donor molecules, although only one of the two transposon strands is used. Moreover, donor sites could be used multiple times implying that the transposon undergoes replication at the donor site after a single strand is “peeled off”. Double strand transposon circles were also identified and these behave as transposon donors in the presence of transposase. Strand-specific cleavage and transfer were also demonstrated in an in vitro system in this study.

Presumably, many of these mechanistic observations will also apply to the IS91 family of prokaryotic insertion sequences.


  1. Zabala JC, de la Cruz F, Ortiz JM . Several copies of the same insertion sequence are present in alpha-hemolytic plasmids belonging to four different incompatibility groups. - J Bacteriol: 1982 Jul, 151(1);472-6 [PubMed:6282809] [DOI]
  2. 2.0 2.1 Diaz-Aroca E, de la Cruz F, Zabala JC, Ortiz JM . Characterization of the new insertion sequence IS91 from an alpha-hemolysin plasmid of Escherichia coli. - Mol Gen Genet: 1984, 193(3);493-9 [PubMed:6323920] [DOI]
  3. Romantschuk M, Richter GY, Mukhopadhyay P, Mills D . IS801, an insertion sequence element isolated from Pseudomonas syringae pathovar phaseolicola. - Mol Microbiol: 1991 Mar, 5(3);617-22 [PubMed:1646375] [DOI]
  4. 4.0 4.1 4.2 4.3 Tavakoli N, Comanducci A, Dodd HM, Lett MC, Albiger B, Bennett P . IS1294, a DNA element that transposes by RC transposition. - Plasmid: 2000 Jul, 44(1);66-84 [PubMed:10873528] [DOI]
  5. 5.0 5.1 5.2 5.3 5.4 5.5 Toleman MA, Bennett PM, Walsh TR . ISCR elements: novel gene-capturing systems of the 21st century? - Microbiol Mol Biol Rev: 2006 Jun, 70(2);296-316 [PubMed:16760305] [DOI]
  6. Sohn SG, Lee JJ, Song JS, Lee JH, Sun HI, Park KS, Bae IK, Lee JH, Jeong BC, Lee SH . Nomenclature of ISCRl elements capable of mobilizing antibiotic resistance genes present in complex class 1 integrons. - J Microbiol: 2009 Aug, 47(4);514-6 [PubMed:19763428] [DOI]
  7. 7.0 7.1 Kapitonov VV, Jurka J . Rolling-circle transposons in eukaryotes. - Proc Natl Acad Sci U S A: 2001 Jul 17, 98(15);8714-9 [PubMed:11447285] [DOI]
  8. 8.0 8.1 Thomas J, Pritham EJ . Helitrons, the Eukaryotic Rolling-circle Transposable Elements. - Microbiol Spectr: 2015 Aug, 3(4); [PubMed:26350323] [DOI]
  9. 9.0 9.1 Kapitonov VV, Jurka J . Helitrons on a roll: eukaryotic rolling-circle transposons. - Trends Genet: 2007 Oct, 23(10);521-9 [PubMed:17850916] [DOI]
  10. 10.0 10.1 10.2 10.3 10.4 10.5 Garcillán-Barcia MP, Bernales I, Mendiola MV, De La Cruz F. IS91 Rolling-Circle Transposition. In: Craig NL, Lambowitz AM, Craigie R, Gellert M, editors. Mobile DNA II. American Society of Microbiology; 2002. p. 891–904
  11. 11.0 11.1 Diaz-Aroca E, Mendiola MV, Zabala JC, de la Cruz F . Transposition of IS91 does not generate a target duplication. - J Bacteriol: 1987 Jan, 169(1);442-3 [PubMed:3025186] [DOI]
  12. Mendiola MV, de la Cruz F . Specificity of insertion of IS91, an insertion sequence present in alpha-haemolysin plasmids of Escherichia coli. - Mol Microbiol: 1989 Jul, 3(7);979-84 [PubMed:2552258] [DOI]
  13. Richter GY, Björklöf K, Romantschuk M, Mills D . Insertion specificity and trans-activation of IS801. - Mol Gen Genet: 1998 Nov, 260(4);381-7 [PubMed:9870703] [DOI]
  14. Mendiola MV, Jubete Y, de la Cruz F . DNA sequence of IS91 and identification of the transposase gene. - J Bacteriol: 1992 Feb, 174(4);1345-51 [PubMed:1310503] [DOI]
  15. Bernales I, Mendiola MV, de la Cruz F . Intramolecular transposition of insertion sequence IS91 results in second-site simple insertions. - Mol Microbiol: 1999 Jul, 33(2);223-34 [PubMed:10411740] [DOI]
  16. 16.0 16.1 Mendiola MV, de la Cruz F . IS91 transposase is related to the rolling-circle-type replication proteins of the pUB110 family of plasmids. - Nucleic Acids Res: 1992 Jul 11, 20(13);3521 [PubMed:1321417] [DOI]
  17. 17.0 17.1 Chandler M, de la Cruz F, Dyda F, Hickman AB, Moncalian G, Ton-Hoang B . Breaking and joining single-stranded DNA: the HUH endonuclease superfamily. - Nat Rev Microbiol: 2013 Aug, 11(8);525-38 [PubMed:23832240] [DOI]
  18. 18.0 18.1 18.2 18.3 del Pilar Garcillán-Barcia M, Bernales I, Mendiola MV, de la Cruz F . Single-stranded DNA intermediates in IS91 rolling-circle transposition. - Mol Microbiol: 2001 Jan, 39(2);494-501 [PubMed:11136468] [DOI]
  19. 19.0 19.1 Garcillán-Barcia MP, de la Cruz F . Distribution of IS91 family insertion sequences in bacterial genomes: evolutionary implications. - FEMS Microbiol Ecol: 2002 Nov 1, 42(2);303-13 [PubMed:19709290] [DOI]
  20. 20.0 20.1 Mendiola MV, Bernales I, de la Cruz F . Differential roles of the transposon termini in IS91 transposition. - Proc Natl Acad Sci U S A: 1994 Mar 1, 91(5);1922-6 [PubMed:8127907] [DOI]
  21. He S, Corneloup A, Guynet C, Lavatine L, Caumont-Sarcos A, Siguier P, Marty B, Dyda F, Chandler M, Ton Hoang B . The IS200/IS605 Family and "Peel and Paste" Single-strand Transposition Mechanism. - Microbiol Spectr: 2015 Aug, 3(4); [PubMed:26350330] [DOI]
  22. Toleman MA, Walsh TR . Combinatorial events of insertion sequences and ICE in Gram-negative bacteria. - FEMS Microbiol Rev: 2011 Sep, 35(5);912-35 [PubMed:21729108] [DOI]
  23. Toleman MA, Walsh TR . ISCR elements are key players in IncA/C plasmid evolution. - Antimicrob Agents Chemother: 2010 Aug, 54(8);3534; author reply 3534 [PubMed:20634542] [DOI]
  24. 24.0 24.1 24.2 24.3 24.4 Toleman MA, Bennett PM, Walsh TR . Common regions e.g. orf513 and antibiotic resistance: IS91-like elements evolving complex class 1 integrons. - J Antimicrob Chemother: 2006 Jul, 58(1);1-6 [PubMed:16751201] [DOI]
  25. Partridge SR, Hall RM . In34, a complex In5 family class 1 integron containing orf513 and dfrA10. - Antimicrob Agents Chemother: 2003 Jan, 47(1);342-9 [PubMed:12499211] [DOI]
  26. Boyd D, Cloeckaert A, Chaslus-Dancla E, Mulvey MR . Characterization of variant Salmonella genomic island 1 multidrug resistance regions from serovars Typhimurium DT104 and Agona. - Antimicrob Agents Chemother: 2002 Jun, 46(6);1714-22 [PubMed:12019080] [DOI]
  27. Toleman MA, Walsh TR . Evolution of the ISCR3 group of ISCR elements. - Antimicrob Agents Chemother: 2008 Oct, 52(10);3789-91 [PubMed:18663029] [DOI]
  28. 28.0 28.1 28.2 Pritham EJ, Feschotte C . Massive amplification of rolling-circle transposons in the lineage of the bat Myotis lucifugus. - Proc Natl Acad Sci U S A: 2007 Feb 6, 104(6);1895-900 [PubMed:17261799] [DOI]
  29. Feschotte C, Pritham EJ . A cornucopia of Helitrons shapes the maize genome. - Proc Natl Acad Sci U S A: 2009 Nov 24, 106(47);19747-8 [PubMed:19926864] [DOI]
  30. Thomas J, Schaack S, Pritham EJ . Pervasive horizontal transfer of rolling-circle transposons among animals. - Genome Biol Evol: 2010, 2;656-64 [PubMed:20693155] [DOI]
  31. Thomas J, Phillips CD, Baker RJ, Pritham EJ . Rolling-circle transposons catalyze genomic innovation in a mammalian lineage. - Genome Biol Evol: 2014 Sep 14, 6(10);2595-610 [PubMed:25223768] [DOI]
  32. 32.0 32.1 Grabundzija I, Messing SA, Thomas J, Cosby RL, Bilic I, Miskey C, Gogol-Döring A, Kapitonov V, Diem T, Dalda A, Jurka J, Pritham EJ, Dyda F, Izsvák Z, Ivics Z . A Helitron transposon reconstructed from bats reveals a novel mechanism of genome shuffling in eukaryotes. - Nat Commun: 2016 Mar 2, 7;10716 [PubMed:26931494] [DOI]
  33. Grabundzija I, Hickman AB, Dyda F . Helraiser intermediates provide insight into the mechanism of eukaryotic replicative transposition. - Nat Commun: 2018 Mar 29, 9(1);1278 [PubMed:29599430] [DOI]